Kentec Fire Panel Training
If you're working in fire safety, security industry, electrical installation, or building management in Ireland, mastering the Kentec Syncro Addressable Fire Panel is a must. This advanced fire alarm system is widely used across Irish commercial, industrial, and residential properties, and our specialised training course is designed to give you the skills and confidence to operate, maintain, and commission it effectively.
Whether you're based in Dublin city centre, the suburbs of Cork, or the industrial parks of Limerick, this course is your gateway to becoming a Kentec Syncro expert.
Course Dates: Kentec Fire Training is currently available on our UK website.
Location: Nationwide Availability Online (from our UKs website)– Dublin, Cork, Galway, Limerick, Waterford
Who Should Attend This Kentec Syncro Training in Ireland?
This course is ideal for:
- Fire alarm technicians working across Irish construction and maintenance sectors
- Qualified electricians & security engineers seeking to expand into fire detection systems
- Apprentices and trainees entering the fire safety industry
- Beginners with no prior experience but a strong interest in fire protection
Whether you're installing systems in new builds or maintaining legacy infrastructure, this training will equip you with the practical knowledge needed to work confidently with Kentec Syncro panels.
What Is the Kentec Syncro Addressable Fire Panel?
The Kentec Syncro is a leading addressable fire alarm control panel, trusted by fire safety professionals across Ireland and Europe. Known for its reliability, scalability, and compatibility with major detection protocols (Apollo, Hochiki, Argus Vega), it’s suitable for everything from small retail units to large multi-loop industrial complexes.
Key features include:
- Modular design for flexible installations
- Support for up to four detection loops per panel
- Full cause and effect programming
- PC connectivity for advanced configuration
- Multi-level access control for secure operation
- Event logging and diagnostic tools
Understanding how to navigate these features is essential for anyone involved in fire alarm commissioning or maintenance in Ireland.
Course Structure: What You’ll Learn
Our Kentec Syncro training course is divided into two main modules, each designed to build your expertise step by step.
Module 1: Introduction to Kentec Syncro Fire Panels
This foundational module covers:
- System overview and architecture
- Navigating the main menu and LCD interface
- Understanding internal components: loop cards, PSU, batteries
- Performing basic operations: silencing alarms, resetting the panel, acknowledging faults
- Accessing device information and system status reports
This module ensures you’re comfortable with the panel’s layout and core functions before moving on to advanced configuration.
Module 2: Commissioning and Programming Kentec Syncro Panels
This hands-on module dives into the technical aspects of setup and programming:
- Using the commissioning menu to initialise loops and configure devices
- Loop commissioning: addressing devices, testing integrity, resolving faults
- Connecting the panel to a PC via USB or RS232
- Using Kentec’s configuration software for loop mapping and zone setup
- Programming cause and effect logic and output control
- Creating custom rules for Irish building regulations and fire safety standards
By the end of this module, you’ll be able to fully commission a Kentec Syncro panel and tailor its programming to suit any building layout or fire strategy.
Kentec Syncro Menu Breakdown
Understanding the panel’s menu structure is key to efficient operation. Here’s a breakdown of the most commonly used menus:
Main Menu
| Option | Description |
|---|---|
| Status Reports | View current alarms, faults, and system health |
| Device Information | Access details on detectors, call points, and sounders |
| Event Log | Review historical events including activations and resets |
| Test Mode | Enable testing without triggering full alarms |
| Disablements | Temporarily disable zones or outputs for maintenance |
| Access Levels | Switch between user, engineer, and commissioning modes |
Commissioning Menu
| Option | Description |
|---|---|
| Loop Setup | Initialise loops and verify device communication |
| Zone Configuration | Group devices logically for control and reporting |
| Output Mapping | Assign outputs to specific inputs or events |
| Time Delays | Configure delay periods for alarms and outputs |
| System Parameters | Set panel name, date/time, and protocol type |
PC-Based Programming: Unlocking Advanced Features
While the panel interface allows for basic configuration, full programming is best achieved via Kentec’s PC software. This enables:
- Visual loop mapping for device placement
- Advanced cause and effect logic using drag-and-drop tools
- Backup and restore of panel configurations
- Remote diagnostics and firmware updates
Our course includes step-by-step guidance on connecting the panel to your laptop, installing the software, and creating a fully customised fire alarm strategy.
Why Train with Us?
We understand the unique challenges of fire safety in Ireland—from historic buildings in Dublin to modern developments in Cork. Our trainers are experienced professionals who’ve worked across the country and bring local knowledge to every session.
This isn’t just a generic fire alarm course—it’s tailored to the Irish market, with practical insights, regulatory guidance, and hands-on experience that will set you apart.
Final Thoughts
The Kentec Syncro Addressable Fire Panel is a cornerstone of fire detection systems in Ireland. With its robust features, flexible programming, and widespread use, it’s essential for fire safety professionals to understand how to operate and commission these panels confidently.
Our training course offers a unique opportunity to gain in-depth knowledge, all tailored to the Irish market. Whether you're just starting out or looking to refine your skills, this course is your gateway to becoming a Kentec Syncro expert.
Ready to take the next step in your fire safety career? Let’s get you trained, certified, and confident.
✅ Unlimited Access: Enjoy 2 days of on-demand online access from the moment you sign up.✅ Self-Paced Learning: This Video-on-Demand course allows you to sign up, access, and complete the training at your convenience.
✅ Expert Instruction: Learn from an experienced fire alarm engineer from Ireland.
✅ Comprehensive Content: Includes 3 hours of condensed lessons, popular addressable fire panel in Ireland.
Book Your Place Today
Whether you're based in Dublin, Cork, Galway, Limerick, or anywhere across Ireland, this training course is your opportunity to become a Kentec Syncro expert. Kentec Fire Training is currently available on our UK website.